Labels

Aileron (31) Avionics (71) Canopy (80) Cowl (27) Electrical (38) Elevators (36) Empennage (94) fiberglass (22) Firewall Forward (56) Flap (43) Fuel System (22) Fuel Tank (4) Fuselage (156) Horizontal Stabilizer (25) Interior (27) Landing gear (10) Paint Schemes (2) Parachute (29) prop (2) Rudder (13) Vertical Stabilizer (14) Wing (133) Wing tip (2) Wiring (17)

Monday, December 4, 2017

Progress connecting wire harness: 4 hours

The following work was done over several days:


  • Did initial install of avionics wire harness - lots of loose power and ground wires which will get cleaned up!
  • "permanently" installed GTN 650 connectors and tray
  • Finished GTX 23 transponder connector and mounted to tray
  • Hooked up a variety of power and ground wires for avionics
  • Connected VPX to G3X RS-232 link and completed VPX J1 connector


Hard to see but the black object is the VPX J1 connector:

GTX 23 connected and ready to test:

GTN 650 tray with connectors and spaghetti explosion (will be organized):

GTN 650 back plate with connectors ... a lot going on there:


Posted by at
Labels: ,