- Test fitted fuel pump and fuel lines with wiring - no problems with clearance.
- Added a molex connector to fuel pump and ran wire from fuel pump switch and ground block to pump.
- All wiring in the tunnel area should now be complete so I started cleaning up and organizing the wire there.
- Soldered together the recommended two diodes to split the take off go around (TOGA) wire from the stick grip into two wires to go to the G3X (GEA24) and the GTN-650.
- Finished my first connector for the GTN-650! It's the one with only one wire .... TOGA
- Connected headset power wires to VPX
- Organized headset mic and phone wires for audio panel
- Planned next steps for building avionics wiring harness on bench
First GTN-650 connector ... also the easiest! (diodes in black shrink tube on right)
Fuel pump test fit with all tunnel wiring complete:
Fuel pump with snake skin and molex:
