- Prepped, primed mating surfaces and did initial riveting on firewall oil cooler mount. This is a part from the RV-10 which is designed for a larger oil cooler. I will make an adapter plate to fit the smaller oil cooler for the 360 engine. However if I need to I will be able to swap to a larger oil cooler.
- Sanded and cleaned empennage fairing, waxed vertical fin, then applied a flox gap filler layup to the vertical portion of the fairing. I also added a few pieces of cloth to the right side of the fairing.
Flox filler and some extra cloth curing (the tape pieces are peel ply):
Oil cooler mount riveted and ready to fit adapter plate:
