- Clamped vertical stab forward attach plate in place then clamped vertical stab to it and fuselage
- Aligned vertical stab with horizontal stab and checked alignment with tape measure (many, many times)
- Clamped vertical stab attachment bracket / elevator stop in place and drilled holes for AN3 bolts. I started with the angle drill through the pilot holes in the bracket then I used the regular drill from the back side to open up and ream the holes final size.
Drilling vertical stab mount / elevator stop:
Getting everything lined up:
Drilling pilot holes in vertical stab mount bracket:
Clamping and measuring alignment:
Looking more like an airplane!
