Fairing with first layer of epoxy and micro balloons. (I plan on sanding most of this off then trying the Rage Xtreme filler for the final coat. I also plan on using the Rage on the cowl for pin hole filling.)
I used 3 layers of fiberglass tape for the layup:
While the layup was curing I put in one of the skybolt cowl fasteners:
Initial curing. Top layer is peel ply.
Layup ready for peel ply:
Ready for lay up. (Before I put the fairing on I waxed all of the harness and spacer tape.)
Harness taped in place with cardboard spacer.