- I trimmed and flared the end of the fuel line that connects the right wing tank to the fuel valve. I did one practice trim on some scrap because this line only needed about 1/8" removed. Also the line is difficult to remove from the fuselage so I did everything with it in place. I cleaned out the line with compressed air and alcohol when finished.
- I installed 7 click-bond wire tie clips in the fuselage. I had originally experimented with small wire clips bonded on with e6000 adhesive but those came loose if you put much pressure on them.
Click-bond, bonding:
Right fuel line finished:
Ready to trim fuel line:
