- Installed stainless cabin heat valve on firewall - sealed with included Rectorseal
- Installed flap actuating weldment
- Installed flap motor / actuator on support bracket and installed molex plug
- Installed above in fuselage, complied with Vans flap actuator service bulletin and tested operation
- Mounted flap position sensor and added wire tie anchors secured with e6000 adhesive
- Researched and started fitting cabin heat cable
Flap actuator and weldment installed:
Flap position sensor and wire tie anchors:
Weldment bolted in:
Flap position sensor wire detail:
Cabin heat valve:
