Right skin, stiffeners, spar and trailing edge. 
After this I match drilled the stiffeners with the skins and then deburred all the holes.
Match drilling complete. 
I also got all the stiffeners dimpled then scuffed, cleaned and primed them.
Construction progress and builder's log for my Van's RV-7 project N769WB
Sunday, July 22, 2012
Prep work on rudder stiffeners and skin: 6.3 hours
Finished trimming all 16 rudder stiffeners. I used the scotch brite wheel to do the final shaping and smooth all edges on the stiffeners. Following this I checked the fit of the stiffeners to make sure they had proper spacing with the other rudder parts.
After this I match drilled the stiffeners with the skins and then deburred all the holes.
I also got all the stiffeners dimpled then scuffed, cleaned and primed them.
After this I match drilled the stiffeners with the skins and then deburred all the holes.
I also got all the stiffeners dimpled then scuffed, cleaned and primed them.
Posted with Blogsy