Cowl ramps with a thin layer of micro filler over the seams and new close out layups. The layups give the baffle material something solid to seal against:
Using paper clips to finish trimming the baffles:
Foam forms for closing the inboard cowl ramps opening with fiberglass:
Snorkel after much filling, sanding, primer and coats of rustoleum hammered finish silver:
Ramps in place and trimmed:
Getting ready to fine tune the baffle fit using the paper clip method (one of many iterations):
Cowl ramps being bonded on:
Positioning the cowl air ramps:
Positioning the top cowl to scribe the trim line on the baffles: